EX560 XLS Brochure
EX560 XLS Spec Sheet
The radio has six programmable buttons to ensure fast communication and
an ergonomically designed Push-to-Talk button that provides easy
operation, even with gloved hands.
Features & Benefits:
Signaling software
Uses Private Line™ and five-tone selective signaling.
Voice compression and low-level expansion
Delivers exceptional voice quality in the noisiest of environments.
Voice-operated transmit
Enables hands-free operation with use of a headset accessory.
Tight/normal squelch
Filters out unwanted interference and enhances audio clarity.
Enhanced battery performance
Lithium-ion battery lasts longer, with no memory “over-charge” side effects.
Emergency signaling
Sends a help signal to predefined person or group.
Rugged design
Tightly sealed against wind and dust, and water-immersible in up to one meter of water for 30 minutes.
Trunking capability
Operates on LTR® system.
Talkaround function
Offers option of speaking through a dispatcher or from unit to unit.
All EX560 XLS Portable models include:
- Standard Battery (Li-ion, 1400 mAh, 7.5V)
- Standard Single Unit Rapid Rate Charger
- Standard Antenna (VHF option must be ordered / UHF Band 1/ UHF Band 2)
- Carry Holster
- Three Year Warranty
Features:
- IP67 Submersible with Standard Battery
- Up to 160 Conventional Channels and/or 15 Trunked Zones
- Up to 99 Channels per Conventional Zone & up to 16 Talkgroups per LTR Zone
- 12.5/25 kHz Switchable Channel Spacing
- Small Size and Light Weight
- 14 Character Alphanumeric Display
- Limited DTMF Keypad
- 2 Programmable Side Buttons
- 3 Programmable Front Buttons
- Programmable Emergency Button
- X-Pand Technology
- Internal VOX
- Priority or Dual Priority Scan (Conv. Only)
- Channel/Zone Selection programmable on Top or Front of radio
- Busy Channel Lockout
- Home Channel Revert (LTR Operation Only)
- Clock & Alarm
- Adjustable Power Levels
- Battery Gauge and RSSI Indicator
- Quik-Call II Encode/Decode (Conv. Only)
MDC Signaling on Conventional and LTR Modes:
- MDC1200 Emergency Signaling (Encode)
- MDC1200 PTT ID (Alphanumeric ID- Encode/Decode)
- MDC1200 Call Alert (Encode)
- MDC1200I Selective Call (Encode/Decode)
- MDC1200 Radio Check (Encode/Decode)
- MDC1200 Selective Radio Inhibit (Decode)
Programmable Buttons:
- High/Low Power
- Channel Scan
- Repeater/Talkaround
- Home Channel Revert
- Auto Key (LTR Mode)
- Monitor
- Emergency
- Light
- Radio Call
- Tight/Normal Squelch
- Keypad Lock
- Volume Set
- Speed dial
Band Split |
Band |
Power |
Conv. Channel |
Trunk Zones/Talkgroups |
136-174 MHz |
VHF |
1W to 5W |
160 |
15/16 |
403-470 MHz |
UHF |
1W to 4W |
160 |
15/16 |
450-527 MHz |
UHF |
1W to 4W |
160 |
15/16 |